The RSS Attic Clamp Pro is an innovative clamp and fence system, specially developed for roofs with a raised edge and an open floor. The system, certified according to EN 13374:2019 Class A, offers safety and ease of use when working at height! Before going onto the roof, check whether the fall protection must be installed on a roof with a raised edge or on a roof with an open floor. Adjust simple the position of the clamp based on the situation.
The RSS Attic Clamp Pro is suitable for both open floor and raised edge roofs and can be used on roofs with a maximum pitch of 15 degrees. The clamps are provided with a protective finish to minimize damage to insulation boards or walls. Thanks to the accompanying transport frame, the system is easy to transport and store.
ALWAYS REFER TO THE MANUAL FIRST BEFORE USE
Our manuals are available in many languages. It is essential that before you start to assemble our systems, you always read the manual first and strictly follow the instructions in it. Failure to follow the manual correctly can lead to serious accidents.
By loosening just two bolts, the stand can be easily changed position. This makes the RSS Attika Clamp Pro suitable for both roofs with an open floor and roofs with a raised edge.
Yes, the fences are the same for all systems. So you don't have to purchase the fences again when you buy the RSS Attika Clamp Pro.
The raised edge must be made of hard material. Be careful not to tighten the clamp too hard (max 10 Nm.)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Perhaps you have a question about our roof edge protection or you are looking for more information. You can find all the information you need on our Frequently Asked Questions page.
