Spare and replacement parts can be easily ordered through our website or directly from the dealer.
This black hook is mounted at the top of the RSS stanchion for sloping roofs. Together with the red hook, it ensures that the installed railing remains securely attached to the stanchion. This component is supplied without mounting hardware.
Specifications
Specifications
This red hook is compatible with both the RSS Sloping Roof and RSS Flat Roof systems. The hinged hook functions in both systems to secure the installed fence to the stanchion. This component is supplied without mounting hardware.
Specifications
Specifications
This small red hook is designed to secure the U-profile in transport mode, allowing the stanchions to be stacked easily and efficiently. This component is supplied without mounting hardware.
Specifications
Specifications
This cover cap is used in both the upright of the RSS Sloping Roof and the RSS Flat Roof systems. The plastic cap is used as a finish for the aluminum rack supports, in which the fences rest.
Specifications
Specifications
The safety hook is one of the most essential components of the stanchion in the RSS Sloping Roof system. The hook is mounted in pairs on the opposite side of the stanchion's U-profile. The purpose of the red safety hook is to latch behind the edge of the gutter, ensuring the fall protection system is securely attached.
Specifications
Specifications
The safety hook is one of the most essential components of the stanchion in the RSS Sloping Roof system. The hook is mounted in pairs on the opposite side of the stanchion's U-profile. The purpose of the red safety hook is to latch behind the edge of the gutter, ensuring the fall protection system is securely attached.
Specifications
Specifications
The gas spring is a component of the stanchion in the RSS system for sloping roofs. It is mounted inside the U-profile and functions to provide counterpressure to the hinged section of the stanchion. This ensures the stanchion is secured and remains firmly positioned behind the roof gutter. This component is supplied without mounting hardware.
Specifications
Specifications
The red base plate is attached to the bottom of the stanchion. During use, this base plate rests against the facade. This component is supplied without mounting hardware.
Specifications
Specifications
This component is located at the bottom of the stanchion in the RSS Sloping Roof system. It connects the base plate to the stanchion and allows the base plate to tilt, ensuring it can rest against the facade at the desired angle. This component is supplied without mounting hardware.
Specifications
Specifications
This small red hook is designed to secure the U-profile in transport mode, allowing the stanchions to be stacked easily and efficiently. This component is supplied without mounting hardware.
Specifications
Specifications
This black T-hook is mounted at the top of the RSS stanchion for flat roofs. Together with the red hooks, the T-hook ensures that the installed fence remains securely attached to the stanchion. This component is supplied without mounting hardware.
Specifications
Specifications
This cover cap is used in both the upright of the RSS Sloping Roof and the RSS Flat Roof systems. The plastic cap is used as a finish for the aluminum rack supports, in which the fences rest.
Specifications
Specifications
The concrete block support ensures a solid and secure attachment of the RSS Flat Roof Classic system. By placing the concrete blocks in this support, the system is firmly anchored to the surface, even in strong winds.
Specifications
Specifications
This black T-hook is mounted at the top of the RSS stanchion for flat roofs. Together with the red hooks, the T-hook ensures that the installed fence remains securely attached to the stanchion. This component is supplied without mounting hardware.
Specifications
Specifications
This small red hook is designed to secure the U-profile in transport mode, allowing the stanchions to be stacked easily and efficiently. This component is supplied without mounting hardware.
Specifications
Specifications
This cover cap is used in both the upright of the RSS Sloping Roof and the RSS Flat Roof systems. The plastic cap is used as a finish for the aluminum rack supports, in which the fences rest.
Specifications
Specifications
This cap serves as a cover for the round tube of the RSS Roof Shelter.
Specifications
Specifications
The square tube of the RSS Roof Shelter is used to connect and secure the Roof Shelter fences.
Specifications
Specifications
Protects your roof against aluminium corrosion and prevents the system from shifting.
Specifications
Specifications
This should always be assessed on site. A zinc box or mast gutter with sufficient gutter brackets (every 60 cm and fixed in healthy wood) is usually a strong gutter. Gutters made of plastic or synthetic material are definitely not. The rule of thumb that you can use: you should be able to stand in the gutter. If the gutter is questionable or bad, the system can still be installed, provided that the RSS base plate is also used.
This is only possible when using the RSS base plate.
Yes, to apply the system to a flat roof, there must be a raised edge of at least 6 cm behind which the upright can hook. In addition, the round plate of the upright must be able to rest against a hard material, such as a wall or facade.
National legislation applies here. Usually you are required to take safety measures from a standing height of 2.5 meters. Think of a harness or other individual safety measures. The system can also be built up with a cherry picker or lift.
The system can be used as long as the maximum wind force is observed, see the manual. To make the system more stable, an accessory can be used: the RSS wind protection.
This can be done at one of our rental dealers. To do this, go to Dealers and navigate to rental.
To store and easily transport the RSS Sloping Roof system.
For RSS Pitched Roof, 3 meter and 2 meter fences are immediately available.
Yes, this system is foldable and therefore easy to store and transport.
Yes, once the system is in place it can be lifted to work underneath. This saves a lot of time and energy in setting up and taking down. For your own safety, make sure you are personally attached.
Only 1 concrete block is needed per stanchion.
Yes, the fences are the same and therefore interchangeable.
Yes, the concrete blocks are the same and can also be used with other RSS-Roof systems.
No, but the uprights are easy to fold and therefore easy to transport. You can choose to use the Compact frame for the concrete blocks and fences.
Yes, the fences of the RSS sloping roof system can be used for this system.
This is possible at one of our rental dealers.To do this, go to the 'dealers' menu item and navigate to rental.
Because it is an extra-narrow flat roof system with a compact stanchion, it provides additional workspace for tasks or, for example, installing an extra row of solar panels.
The Compact stanchion is only 60 cm wide, making it significantly narrower than other flat roof systems.This leaves additional workspace available on the roof.
To store and transport the system (up to 40 meters) from the RSS Flat Roof Compact system.
Yes, the fences of the RSS Pitched Roof system can be used for this system.
When the height of the roof edge is less than 150 mm.
Yes, all RSS concrete blocks have recesses in the corners, making them suitable for any system. applicable and are also easy to stack for transport. Ask the nearest dealer to the possibilities.
A transport frame can hold 40 meters, including all accessories, concrete blocks, stanchions, and fences.
The side boards for this system are equipped with a long aluminum hook that can be easily attached to the fence.
This is possible at one of our rental dealers.To do this, go to the 'dealers' menu item and navigate to rental.
This system is 69 cm wide in total. Relatively narrow for a collective flat roof system. This leaves sufficient working surface on the roof.
The Roof Shelter can be used as a flat roof system as well as a facade system. One system for multiple roof types can be a smart investment. You only need a few additional components to use the system for both roof types.
The concrete blocks are placed with the short side towards the fence. In addition, you must start with 1 concrete block on a red roof beam and finish with 2 concrete blocks on top of each other. See the manual for further explanation.
Yes, the concrete blocks are stackable due to the different recesses in each corner.
Yes, the concrete blocks can be used universally with all RSS-Roof systems that use concrete blocks.
Yes, there is a transport frame available. This can hold a total of 24 meters. These transport frames are easily stackable and optimized for transport and storage.
If the height of the roof edge is less than 150 mm.
There are special recesses in the side plank that can be placed on the roof beam. An elastic band goes around this and then the concrete blocks have to be placed against this.
This is possible at one of our rental dealers.To do this, go to the 'dealers' menu item and navigate to rental.
RSS Handrail clamp pro FAQ
Are you looking for quality roof edge protection? Our dealers are located throughout the Netherlands and in various places in Europe.
Perhaps you have a question about our roof edge protection or you are looking for more information. You can find all the information you need on our Frequently Asked Questions page.
